Currently Not in Stock For further assistance please contact email@example.com
For further assistance please contact firstname.lastname@example.org
Holder Only Sold without products
Features Designed to hold our luxury Joy 480ml glass range of products. If purchasing our holders for another brand please check your bottle dimensions are within our guide shown below 'Bottle Sizes'.
Lockable, with unique drop down feature for easy cleaning and loading.
Tyneham Recommendations For both commercial and residential use.
Material 2.5/2mm stainless steel in Metallic Gold powder coated finish.
Dimensions H x 168mm W x 78mm D x 74mm.
Bottle Sizes Will hold bottles up to 75mm diameter x 145mm in height (top of shoulder). Bottle neck size 29.5mm, pumps will need to be removed before loading bottles.
Fixing Instructions For Single, Double and Triple Wall Mounted Holders.
Your holder is made from 304 certified stainless steel and should not rust but care needs to be taken when installing and cleaning your holders.
Hand Basin Location Fit allowing suitable height above and below holder for access for re-filling and changing the bottle. Recommended minimum height from work surface to bottom of holder = 10cm.
Shower Location If possible, locate the holder arms reach from shower head, not directly beneath it. We recommended a minimum height of 100cm from floor to bottom of holder and if possible fit dispenser into a corner so not to be a hazard.
Fixing Remove Holder from bag and use as template to mark wall, drill using appropriate drill bit and fit plug, attach holder to wall. We recommend this size of holder is attached to surfaces with screws.
1) Loosen screws with allen key, make sure front plate is fully down.
2) Remove pump and load neck of bottle through large holes in top of holder.
3) Once bottles are positioned on front/base plate, slide plate as far up as possible, tighten allen screws and fit pump.
Tyneham does not install holders nor guarantees any of the fixing or tape supplied, due to different surfaces types.
Cleaning For care of your holder, we recommend removing bottles monthly and clean thoroughly using a micro fiber cloth and soapy water. If positioned in hard water areas, vinegar is recommended for removal of lime scale. Harsh chemicals or abrasive cleaners should not be used to clean these holders.
Tyneham does not guarantee their holders against misuse of cleaning.
For maximum presentation keep bottles topped up at all time.
Made in England